Mingtai 3003 alloy aluminum plate supplier

Mingtai Aluminum's large aluminum plate manufacturer was established in 1997. It is a large-scale modern aluminum processing enterprise integrating scientific research, processing and manufacturing. Our products cover 1-8 series aluminum plate and foil, mainly engaged in the production and sales of aluminum plate and foil. It is a well-known private aluminum sheet and foil processing and production enterprise in China. With more than 20 years of experience in the production and processing of aluminum foil and foil, Mingtai Aluminum has risen rapidly and is well known to the users. With advanced production equipment, high-quality product quality and considerate after-sales service, Mingtai has stood out in the aluminum processing industry and has been widely praised by partners and customers all over the world.

Mingtai Aluminum Products: 1060, 5052, 5083, 5086, 6061, 6063, 6082, 5754, 8011, 8079, 3003, 2a12, 16mm or more 7075 aluminum plate

1. Technology upgrade

In order to improve the quality of 3003 aluminum plate, the first thing that needs to be done is to improve the technology. Only by improving the production technology of the product can lay the foundation for improving work efficiency and reducing production cost. For the development of manufacturers, technology is productivity and development. Need to pay attention to the process.

2, material check

The development of 3003 aluminum coil also needs to check the materials. This is the factor that determines the performance and quality of the aluminum plate. It should be noted when selecting. The improvement of product quality is mainly in this aspect. Need to choose the best quality materials for production.

3. Accumulate experience

3003 aluminum plate to improve product quality also needs to be done is the accumulation of experience, this is also a relatively important factor, with experience, the production of the product will reduce the productivity of the defective product, in the process of development needs priority Pay attention to this and produce products of superior quality.

For more information, follow our website:

https://www.mt-aluminum.com/3003-aluminum-plate-3003-aluminum-coil.html

The difference between 3003 aluminum plate and 5052 aluminum plate

3003 aluminum plate and 5052 aluminum plate are two typical aluminum plates in the market. Although both are widely used, many people don't know the difference. Below, to 3003H24 aluminum plate and 5052H24 aluminum plate as an example, for everyone to popularize this knowledge.

1. In terms of chemical composition, 3003 aluminum coil is manganese alloy, and the main alloy element is manganese. 5052 aluminum plate is aluminum magnesium alloy, the main alloy element is magnesium. The aluminum content of 3003 aluminum plate is slightly higher than that of 5052 aluminum plate.

2. In terms of mechanical properties, the tensile strength of 3003H24 aluminum plate is 145-195rm /MPa, while that of 5052H24 aluminum plate is 230-280rm /MPa, much higher than that of 3003H24 aluminum plate. The extension strength of 3003H24 aluminum plate is 115Rm/MPa, while that of 5052H24 aluminum plate is 150Rm/MPa. Therefore, the performance of 5052 aluminum plate is significantly better than 3003 aluminum plate.

3. In terms of common specifications, 3003 aluminum plate is mainly made of thin plate, while thick plate is rarely used; And 5052 aluminum plate in addition to thin plate, thick plate is also widely used.

4. From the scope of application, 3003 aluminum plate is mainly used in humid environment, such as product packaging, refrigerator, air conditioning, cold storage, ventilation pipe, etc. And 5052 aluminum plate is often used in electrical shell, traffic vehicles, pressure vessels, etc., is the manufacture of cars, aircraft fuel tanks, oil pipes commonly used materials.

5. In terms of the price of aluminum plate, the price of 3003 aluminum plate is slightly higher than that of pure aluminum plate, while the price of 5052 aluminum plate is significantly higher than that of 3003 aluminum plate. According to different specifications and thickness, a ton of 5052 aluminum plate price than a ton of 3003 aluminum plate price higher than 2000-3000 yuan.

Although 3003 aluminum plate and 5052 aluminum plate are often used as rust-proof aluminum, but the difference between the two kinds of aluminum plate is still obvious, enterprises must choose the right products according to the production needs. The hardness of 3003 aluminum plate is lower than that of 5052 aluminum plate, and the price is much lower than that of 5052 aluminum plate.

Check out our website for more details:

https://www.mt-aluminum.com/3003-aluminum-plate-3003-aluminum-coil.html

Marine aluminum plate four principles

There are four principles for Marine aluminum alloy material selection:

1. High specific strength and modulus. The structural strength and size of ships are closely related to the yield strength and elastic modulus of materials. Because the elastic modulus and density of aluminum alloys are roughly the same, the addition of alloyed elements also has little effect, so increasing the yield strength within a certain range is powerful to reduce the structure of ships. High strength aluminum alloys are generally difficult to have excellent corrosion resistance and weldability at the same time. Therefore, Marine aluminum alloys are generally medium strength, corrosion resistant and weldable alloys.

2. Excellent welding performance. At present, automatic argon arc welding method is mainly used in ships. Good weldability means that the crack tendency of aluminum alloy formed during welding is smaller, that is to say, aluminum alloy should have good welding crack resistance. The lost weldability cannot be restored by reheat treatment under shipbuilding conditions.

3. Excellent corrosion resistance. Ship structure how many harsh seawater medium and Marine environment, so corrosion resistance is one of the main signs of Marine alloys.

4. Aluminum alloy has good cold and hot forming performance. Due to the cold processing and hot processing in shipbuilding, Marine aluminum alloy must be easy to be processed and formed, without crack defects, and can still meet the requirements of strength and corrosion resistance after processing.

Marine Aluminum plate is Marine Grade Aluminum, which has strict material selection. Currently, Aluminum alloy products such as 5083, 5086, 5454, 5754 and 6061 are mostly used. In practical application, the advantage of Marine aluminum alloy is very obvious. Firstly, small specific gravity can reduce ship weight, save energy consumption and increase load; The second is good corrosion resistance, reduce the cost of oil, extend the service life; Third, welding, processing and forming good performance, conducive to later processing; After the aluminum waste is easy to recover, can be recycled, at the same time, do not burn, fire safety.

For more information on Marine Grade Aluminum, visit our website:

https://www.mt-aluminum.com/marine-grade-aluminum.html